 For
your tube cutting pleasure we have a jig that works great. It uses a
skill saw and length stop, so set the stop to the length and turn on the
saw, roll the tube into the saw and turn till the tube is cut! |
 Vacuum
bag fiberglassing works good on small and medium size parts. See the
Fiberglassing Page for more information on what we use and how we use
it. |
|
 This
is a Foam Bow made out of PVC and a few other pieces of everyday
hardware found in most workshops and garages. Outstanding for
cutting foam for nosecones, bulkheads, or anything you can think to use
foam for. See the Foam Cutting pages for more info. |
 Here
is an insert for a nose cone after being cut by the foam cutter. it cuts
thru this foam like a hot knife thru butter. |
